In this post i will tell you the Fillet command of AutoCAD. Fillet connects two objects with a smooth fitted arc of a specified radius. An inside corner is called fillet and an outside corner is called round, you can create both using FILLET in AutoCAD. You can fillet
- Arcs
- Circles
- Ellipses and elliptical arcs
- Lines
- Polylines
- Rays
- Splines
- Xlines
use of fillet is a convenient method of create an arc with a specified radius that is tangent to two selected objects.
Types of Fillet in AutoCAD
- Polyline
- Radius
- Trim / No trim
- Multiple
I am going to tell you that by using these commands you will be able to complete your drawing very easily. Actually fillet command can be used in many ways, so i am going to tell you one by one how you can use it easily.
- Polyline :- Go to modify section –>> Select Fillet –>> Choose Polyline –>> Select Radius –>> Give the radius press Enter –>> Choose Polyline.
- Radius :- Go to modify section –>> Select Fillet –>> Choose Radius –>> Give the radius press Enter –>> Select first object (line) –>> Select second object (line).
- No trim :- Go to modify section –>> Select Fillet –>> Choose Trim –>> Select No trim –>> Select Radius –>> Give the radius press Enter –>> Select first object (line) –>> Select second object (line).
- Multiple :- Go to modify section –>> Select Fillet –>> Choose Multiple –>> Select Radius –>> Give the radius press Enter –>> Select first object (line) –>> Select second object (line). If you want to do more fillet Select those object whichย you want to fillet.
Please follow and like us:
About Author
